三友集团-LOGO
 
  Company Profile  
  Product Par  
   
-- Automobile travel recording instrument
-- Period recording instrument
-- GPS positioning system
  Feedback  
  Contact Us  
 
 
 · Product & Service >> Intelligent Traffic Products >> Product par >> GPS positioning system
 

Model SY 101/Model GPRS onboard terminal

    Model SY 101-GPS /GSM travel recording and monitoring height terminal (shorted as Model GSM onboard terminal) is a version mainly designed for travel recording and monitoring height of physical distribution and passenger stock, this onboard body is small and delicate without powerful function, low price and high reliability, especially suitable for taxi, physical distribution haulage vehicle, special type vehicle, vehicle leasehold industry, and may also be used for vehicle guard against theft.
   Model GSM onboard terminal is designed with a brand-new control concept, nearly all controls are performed in programmable mode. Trigger mode of various sub-alarms may be set with input signal; up to 64 electronic fences are available for setting transgress alarm, in emergency condition, circuit and oil way cannot be cut off for engine misses; limiting speed function not only has ordinary overspeed alarm function, but also designs low speed alarm function to satisfy special or temporary application. This version also has relatively strong alarm function, could completely meet guard against theft, counter-robbing, emergency aid etc requirements.
   Model SY 101/GPRS onboard machine reserves all functions of physical distribution dispatching type onboard machine, and have control commands of all physical distribution dispatching type onboard machines, besides fixed universal guard against theft function, this machine also adopts design concept of programmable terminal, nearly all controls may be realized via central programming, so application scope of this machine is greatly expanded.
   Model SY 101/GPRS onboard machine provides maximum flexibility for down stream users, they could provide different applications according to different customers or requirements. Application mode is not determined by fixed function of machine as ever, every machine may be set independently, application scope completely depends on user's imagination, ingenuity and programming configuration of software at monitoring center.
  Main function of GPS / GPRS onboard terminal
·Double monitoring center function. ·Remote control oil-break, power-off function
·Information service ·Remote control vehicle lock function
·Satellite positioning monitoring ·Report thief alarm, rob alarm function
·Compress and upload positioning
   information
·DTMF alarm
·Remote modification of functional
   parameter at the center
·Cut off ACC to enter electricity saving mode
   automatically
·Fast wireless upload via GPRS network
一、Protected State
   Model GSM onboard terminal has three protection modes:
   Non-protected state, early-warning state, warning state, enter early-warning state by handgrip setting or remote controller startup, after early-warning state is kept for 2 minutes, enter warning state, warning state may be cancelled by inputting password via handgrip or pressing remote controller key, engine cannot be started in early-warning, warning state.
   Onboard machine without handgrip or remote controller does not support protection, can not enter early-warning state, will not support thief alarm, password error, illegal ignition alarm, however, door and engine may be monitored using user-defined alarm.
二、Alarm condition and trigger mode
1、Condition of fixed alarm
1)Model GSM onboard terminal supports up to 12 fixed alarm conditions:
2)GPS antenna open circuit: when GPS antenna is open for 5s, antenna open circuit alarm is
     triggered.
3)GPS receiver fault: if there is no data output on GPS plate for continuous 15 s, alarm will be
     triggered.
4)Thief alarm: in case vehicle is in warning state, door is opened, correct password is not
     entered within one minute, alarm will be triggered.
5)Alarm of password error for three times: when vehicle is in warning state, false password is
     entered for three times, alarm will be triggered.
6)When storage battery removal signal is monitored to continue for 30 s, alarm will be triggered.
7)Emergency button (rob alarm): when emergency button is pressed, alarm will be triggered.
8) Driving-out prohibition alarm: when the vehicle leaves preset area, and duration exceeds
     preset time, alarm will be triggered.
9)Driving-in prohibition alarm: when the vehicle enters preset area, and duration exceeds preset
     time, alarm will be triggered.
10)Speed alarm: preset minimum, maximum vehicle speed and overspeed time, when vehicle
     speed exceeds preset limiting speed section, and duration exceeds the time preset in.
11) alarm will be triggered. Speed alarm may be used to monitor vehicle movement, involuntary
     stoppage etc conditions.
12)Illegal ignition alarm: when onboard machine is in early-warning or warning state, engine
     running exceeds 20 s, alarm will be triggered.
13)Temperature alarm: after onboard machine is equipped with temperature sensor, high end,
     low end temperature may be set, if actual sensor temperature is higher than the high end
     temperature or is lower than the low end temperature, alarm will be triggered.
2、User-defined alarm
    Besides fixed alarm conditions, the system also supports 8 user user-defined alarms.......
 
Copyright © 2006 Plant area of China•Sanyou Holding Group All right reserved
Web Design & Optimize:Zowee